Re-Authenticating A Port - Dell S6100 Configuration Manual

Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Auth Type:
Auth PAE State:
Backend State:
Auth PAE State:
Backend State:

Re-Authenticating a Port

You can configure the authenticator for periodic re-authentication.
After the supplicant has been authenticated, and the port has been authorized, you can configure the authenticator to re-authenticate the
supplicant periodically. If you enable re-authentication, the supplicant is required to re-authenticate every 3600 seconds by default, and you
can configure this interval. You can configure the maximum number of re-authentications as well.
To configure re-authentication time settings, use the following commands:
• Configure the authenticator to periodically re-authenticate the supplicant.
INTERFACE mode
dot1x reauthentication [interval] seconds
The range is from 1 to 31536000.
The default is 3600.
• Configure the maximum number of times the supplicant can be re-authenticated.
INTERFACE mode
dot1x reauth-max number
The range is from 1 to 10.
The default is 2.
Example of Re-Authenticating a Port and Verifying the Configuration
The bold lines show that re-authentication is enabled and the new maximum and re-authentication time period.
Dell(conf-if-Te-1/1/1/1)#dot1x reauthentication interval 7200
Dell(conf-if-Te-1/1/1/1)#dot1x reauth-max 10
Dell(conf-if-Te-1/1/1/1)#do show dot1x interface TenGigabitEthernet 1/1/1/1
802.1x information on Te 1/1/1/1:
-----------------------------
Dot1x Status:
Port Control:
Port Auth Status:
Re-Authentication:
Untagged VLAN id:
Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Auth Type:
Auth PAE State:
Backend State:
90 seconds
120 seconds
2
30 seconds
30 seconds
3600 seconds
10
SINGLE_HOST
Initialize
Initialize
Initialize
Initialize
Enable
FORCE_AUTHORIZED
UNAUTHORIZED
Enable
None
90 seconds
120 seconds
10
30 seconds
30 seconds
7200 seconds
10
SINGLE_HOST
Initialize
Initialize
802.1X 91