10 TUNING THE CHASSIS
10.11
42
Adjusting the riding sag
B00292-10
–
Install the right side panel. (
–
Check the free travel of the foot brake lever. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Remove the right side panel. (
–
Remove main silencer. (
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber.
–
After removing the shock absorber, clean it thoroughly.
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate (All EU models)
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.)
Weight of rider: 85 ...
95 kg (187 ... 209 lb.)
Spring rate (All US models)
Weight of rider: 65 ...
75 kg (143 ... 165 lb.)
Weight of rider: 75 ...
85 kg (165 ... 187 lb.)
Weight of rider: 85 ...
95 kg (187 ... 209 lb.)
Info
The spring rate is shown on the outside of the spring.
Finishing work
–
Install the shock absorber.
–
Install the main silencer. (
–
Install the right side panel. (
–
Check the free travel of the foot brake lever. (
–
Check the static sag of the shock absorber. (
–
Check the riding sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
–
Remove the motorcycle from the lift stand. (
p. 68)
p. 89)
p. 49)
p. 68)
p. 68)
p. 49)
(
p. 59)
39 N/mm (223 lb/in)
42 N/mm (240 lb/in)
45 N/mm (257 lb/in)
39 N/mm (223 lb/in)
42 N/mm (240 lb/in)
45 N/mm (257 lb/in)
(
p. 60)
p. 69)
p. 68)
p. 89)
p. 40)
p. 40)
p. 49)
p. 38)