Arctic Cat 650 Twin2004 Service Manual page 41

13. Hold the intermediate shaft (A) with an Allen
wrench.
14. Remove the intermediate shaft sprocket nut (A);
then remove the sprocket (B), drive chain (C), and
the rear camshaft drive chain (D).
15. Remove the front camshaft drive chain from the
intermediate sprocket (A) on the right side; then
remove the shaft from the engine.
3-12
KX252
16. Remove the cylinder bolts (B); then remove the
cylinder (A). Account for the base gasket (C) and
alignment pins (D).
KX253
17. Place a clean, lint-free cloth under the piston; then
remove the piston pin retainer rings (A).
KX254
KX253
KX256A
KX257A
ATV2067