Arctic Cat 650 Twin2004 Service Manual page 193

14. Mode Button — Used (in conjunction with the
Odometer/Trip Meters/Hour Meter) to shift the
odometer/trip meters/hour meter display through
the four modes: odometer, trip meter (A), trip
meter (B), and hour meter.
REPLACING SPEEDOMETER
To replace the speedometer, use the following proce-
dure.
1. Remove the four nylon fasteners securing the
instrument pod; then remove the ignition switch
retaining nut.
2. Remove the front rack and front fenders; then dis-
connect the multi-pin connector.
3. Remove the three nuts securing the mounting
studs; then remove the speedometer.
4. Route the new wiring harness down through the
opening; then mount the speedometer and secure
with the three nuts; then connect the multi-pin
connector.
5. Install the front fenders and front rack; then install
the instrument pod and secure with the nylon fas-
teners.
6. Secure the ignition switch with the retaining nut.
9
9-9