Clearing (#I 2 Clear); Rom Indication (#I3 Rom); Resetting The Contact Sensor Position (#I4 Cs Set) - Canon PC1000s Service Manual

CHAPTER
2
USING THE MACHINE
3 . 1 7 Clearing
(#I2
CLEAR)
Item Level 2 item Description
TEL & USER
DATA
USER DATA
SERVICE SW
SERVICE
DATA
REPORT
COUNTER
CARD
ERR
ALL
Use it to clear all areas under user registrationlsetting.
Use it to clear the tel registration data' and user data.
'One-touch dial, speed dial. and group dial numbers.
Use it to clear user data. SSSW and
TEL
registration data
are not cleared.
Use it to clear the settings under SSSW. The user data is not
cleared.
Use it to clear the counters (numerator), date, and start data
form the system dump list.
ACTIVITY Use it to clear the contents of the communications control
report.
JAM
not used.
ERR not used.
ALARM not used.
Use it clear the counter data.
not used.
not used.
Use it to clear all settingslregistration data excluding the
counter readings (denominator, numerator) from the sys-
tem dump list and $5.
3.18
ROM Indication
(#I3
ROM)
The following is a list of the itemslparticulars for
ROM
indication mode:
Item Description
MAIN Use it to indicate the version of the ROM on the image processor PCB.
MAIN2 Use it to indicate the version of the CPU on the image processor PCB.
ECONT Use it to indicate the version of the ROM on the
DC
controller PCB.
PDL Use it to indicate the version of the ROM on the printer controller PCB.
3.19
Resetting the Contact Sensor Position (#I
4
CS SET)
Not used.
COPYRIGHT 02002 CANON INC. CANON PCICiWimageCLASS
DGM)s
REV. 1
AVG.2002
2-57