Stack Delivery Operation - Canon Inner Finisher-H1 Service Manual

Stack Delivery Operation

■ Outline
The paper in the processing tray is delivered in stacks using the assist guide and assist claw.
The assist guide supports the trailing edge of the paper stack, and the assist claw pushes out to eject the stack.
The assist guide's home position is detected by the assist HP sensor (PS7).
The assist guide and assist claw are moved to the stack delivery position by the rotating assist motor They are returned to their
home positions by the assist motor (M5) rotating in reverse.
Related error code
• E514-8001: Assist motor error
• E514-0002: Assist motor error
■ Divided Delivery
Normally in non-sort or shift-sort mode, paper aligned and shifted on the processing tray is divided every 2 sheets and delivered.
If the 3rd sheet is the last sheet, the last sheet is included to create a 3-sheet stack and delivered.
The following table shows the number of divided delivery sheets depending on the paper type, paper size, and paper weight.
In non-sort mode
Paper type
Transparency, label, -
postcard, envelope,
tracing paper
Recycled 1/2/3, pre- Stack possible size -
punched
Other than stack
possible size
Other than above Stack possible size 75 g/m
Assist Motor (M5)
Paper size Paper weight
-
-
2
or less
2
76 g/m to 105
2
g/m
Assist Claw
Assist Guide
Assist HP Sensor
(PS7)
Assist Claw
Print mode Number of divided delivery sheets
1-sided/2-sided 1 sheet
1-sided/2-sided 2 sheets
1-sided/2-sided 1 sheet
1-sided 2 sheets
2-sided Paper length: 182 mm to 216 mm
Paper width 210 mm to less than 279.4 mm
(16K, EXEC, B5)
2 sheets
Paper length: 355.6 mm (LGL) or more
2 sheets
Other than above: 5 sheets
1-sided/2-sided Paper width 210 mm to less than 279.4 mm
(16K, EXEC, B5)
2 sheets
29
2. Technical Explanation