4. Remove the 2 Screws [2] of the Front/Rear Return
Belt Guide.
NOTE:
When attaching part of the Rail is positioned at attaching
part of the Inner Puncher Unit, remove the Rail before
proceeding to the next procedure.
2x
[1]
5. Return the machine to its original position.
6. Remove the Rear Return Belt Guide [1].
• 1 Boss [2]
[2]
7. Remove the Front Return Belt Guide [1].
• 1 Boss [2]
• 1 Clip [3]
• 1 Bushing [4]
[1]
[1]
4. Parts Replacement and Cleaning
[4]
CAUTION:
Points to Note when Installing the Front Return Belt
Guide
Attach the part [B] of the Bushing [A] in the direction of
an arrow as shown in the figure.
[A]
8. Remove the Return Belt Unit [1].
• 1 Clip [2]
• 1 Bushing [3]
73
[2]
[1]
[3]
[B]