Canon Inner Finisher-H1 Service Manual page 75

CAUTION:
When reinstalling the Assist Motor Assembly, apply
tension to the belt in the following procedures.
1. Loosen the Screw [1], and attach the Spring [2].
2. Apply tension to the belt [4] retaining the plate end
[3] by a hand and then tighten the screw [1].
3. Check the fixing positioin of the screw. If the fixing
positioin is poor, reinstall the screw.
1x
1x
[4]
2. Remove the Assist Motor [1].
• 2 Screws [2]
2x
[2]
[3]
[1]
[2]
[1]
69
4. Parts Replacement and Cleaning