Staple-Free Staple Unit - Canon Inner Finisher-H1 Service Manual

Front 1-point stapling (45 deg)
Center 2-point stapling
Alignment
front side

Staple-free Staple Unit

Item
Stapling method
Stapling position
Stapling size
Stapling capacity
Manual stapling
Rear 1-point stapling (45 deg)
5.0 -/+ 2.0 mm 5.0 -/+ 2.0 mm
Paper size
A3, A4
Alignment
B4, B5
back side
11X17, LTR
A4R
LTRR, LGL
L1
8K, 16K
L2
EXEC
Specifications
Pressing by rotating cam
Rear 1-point stapling (see below)
A3, B4, A4, B5, 11X17, LTR, 8K, 16K
52 to 64 g/m2: 5 sheets or less
2
More than 64 to 81.4 g/m : 4 sheets or less
2
More than 81.4 to 105 g/m
None
Rear 1-point stapling (30 deg)
Delivery direction
5.0 -/+ 2.0 mm
L1 L2
83 -/+ 4.0 203 -/+4.0
63 -/+ 4.0 183 -/+ 4.0
74 -/+ 4.0 194 -/+ 4.0
39.5 -/+ 4.0 159.5 -/+ 4.0
42.5 -/+ 4.0 162.5 -/+ 4.0
69.5 -/+ 4.0 189.5 -/+ 4.0
68 -/+ 4.0 188 -/+ 4.0
: 3 sheets
13.5 -/+ 2.0 mm
7.8 -/+ 2.0 mm
3.0 mm or less
Stapling position
8
1. Product Overview
Manual stapling
Unit (mm)
L3 Pitch
5.0 -/+ 2.0 120
5.0 -/+ 2.0 120
5.0 -/+ 2.0 120
5.0 -/+ 2.0 120
5.0 -/+ 2.0 120
5.0 -/+ 2.0 120
5.0 -/+ 2.0 120
Remarks
• Tooth-shaped clinch
• Stapling at four locations (upper left,
upper right, lower right, lower left) is
possible using the host machine's LUI
through image processing of the printed
surface.
• Staplinga mix of same width is possible.
• Stapling a mix of different widths is not
possible.