Overview; Adjustment And Functional Setting In Service Mode - Canon Inner Finisher-H1 Service Manual

Overview

Adjustment and Functional Setting in Service Mode

■ Adjustment
For details, see the service manual for the host machine.
No Items
[1] SORTER > ADJUST > STP-2P
[2] SORTER > ADJUST > INSTP-F1
[3] SORTER > ADJUST > INSTP-R1
[4] SORTER > ADJUST > FR-ST-PS
[5] SORTER > ADJUST > FR-STP-X
[6] SORTER > ADJUST > FR-STP-Y
[7] SORTER > ADJUST > RBLT-PRS
[8] SORTER > ADJUST > MSTP-2P
[9] SORTER > ADJUST > INF-ALG1
[10] SORTER > ADJUST > INF-ALG2
[11] SORTER > ADJUST > CENT-ALG
[12] SORTER > ADJUST > PNCH-X
[13] SORTER > ADJUST > PNCH-Y
■ Function Settings
For details, see the service manual for the host machine. However, see below for FIN-SP1.
No Items
[1] SORTER> OPTION> TRY-STP
[2] SORTER> OPTION> MD-SPRTN
[3] SORTER> OPTION> MSTP-TMG
[4] SORTER> OPTION> FR-ST-PO
[5] SORTER> OPTION> FR-ST-SW
Outline
Adjustment of 2-stapling position
Adjustment of front 1-stapling posi-
tion
Adjustment of rear 1-stapling position When the staple position in front/ rear direc-
Adjust staple free pressure
Adjustment of staple position for pa-
per feed direction in the staple free
stapling mode
Adjustment of staple position for front/
rear direction in the staple free sta-
pling mode
Adjustment of return belt pressure
Adjustment of manual stapling posi-
tion
Adjustment of alignment position (A4) When the paper alignment position is dis-
Adjustment of alignment position
(LTR)
Adjustment of center alignment
standard position
Adjusting the punch hole position in
feed direction
Adjusting the punch hole position in
the horizontal registration direction
Outline
To set whether to suspend delivery when
it is detected that the Finisher Tray is full.
To set whether to stop themachine when
an error occurs at Finisher.
To set the duration of time before exe-
cuting automatic stapling at manual sta-
ple mode
To set the staple position of staple free
stapling
To set the staple-free stapling without
staple cartridge
76
5. Adjustment
Use case
When the staples position in front/rear di-
rection is displaced in the 2-stapling mode
When the staple position in front/rear direc-
tion is displaced in the front 1-stapling mode
tion is displaced in the rear 1-stapling mode
Upon user's request
When the staple position in paper feed di-
rection is displaced in the staple free sta-
pling mode
When the staple position in front/rear direc-
tion is displaced in the staple free stapling
mode
When the paper alignment position is dis-
placed
When the staple position in front/rear direc-
tion is displaced in the manual stapling
mode
placed
When the paper alignment position is dis-
placed
• When the standard position for the cen-
ter alignment is misaligned
• When the paper alignment position is
displaced
• When the punch hole is displaced in
feed direction
• This mode is available when the punch-
er unit has been installed
• When the punch hole is misaligned in
the horizontal registration direction
• This mode is available when the punch-
er unit has been installed
Use case
Upon user's request
When preferring to run the machine al-
though an error occurs at Finisher
Upon user's request
Upon user's request
Upon user's request