Canon Inner Finisher-H1 Service Manual page 64

■ Procedure
1. Remove the Upper Stay [1].
• 2 Screws [2]
2x
2. Move the Front Alignment Plate [1] and Rear
Alignment Plate [2] to the slit [3] of the Tray Guide
Cover.
[2]
[3]
3. Release the latch [1] and move the Front/Rear Tray
Plate [2] to the bottom.
[2]
4. Remove the Tray Guide Cover [1].
• 2 Screws [2]
• 2 Claws [3]
[2]
[1]
[1]
[3]
[1]
[2]
4. Parts Replacement and Cleaning
2x
[3]
[2]
CAUTION:
Do not nip the Paper Fold [1] when the Tray Guide
Cover is installed.
[1]
58
[1]
[3]
[1]