Installation Procedure; Preparation For Host Machine - Canon Inner Finisher-H1 Service Manual

Installation Procedure

CAUTION:
Check that the main power switch is OFF and the
power plug is disconnected from the outlet.

Preparation for Host Machine

CAUTION:
When installing the inner puncher unit together with the
finisher, refer to the installation procedure supplied with
the inner puncher unit instead of referring this

installation procedure.

1. When the Reversal Guide has been installed to the
host machine, remove it.
• 2 Claws
2. Remove the Interface Cover.
• 2 Claws
NOTE:
Removed cover is used in the procedure later.
3. Remove the Delivery Tray.
CAUTION:
Be careful so that the covers of the host machine may
not be damaged.
92
6. Installation