Processing Tray Unit; Outline; Stacking Operation - Canon Inner Finisher-H1 Service Manual

Processing Tray Unit

Outline

The processing tray unit aligns, shifts, and staples or staples without staples the delivered paper. Then the assist guide and assist
claw deliver the paper onto the delivery tray.
The names and functions of the components of the processing tray are as follows:
Name
Paddle
Return Belt
Stopper
Front/Rear Alignment Plate
Assist Guide
Assist Claw
Stapler Unit
Staple-free Staple Unit
Paper Retainer

Stacking Operation

The paper delivered from the delivery roller is stacked on the processing tray and aligned in the feed direction.
How paper is delivered from the delivery roller and stacked on the processing tray is described below.
Paper Retainer
Paddle
Delivery tray
Paper Retainer
Stapler Unit
Feeds the paper delivered from the delivery roller to the processing tray unit.
Feeds the paper to the rear of the processing tray unit and presses the paper against the
stopper.
Allows the paper stacked on the processing tray to be pressed against itself to align the paper
in the feed direction.
Aligns the paper stacked on the processing tray in the width direction and shifts the paper.
The assist guide supports the trailing edge of the paper stacked on the processing tray unit,
and the assist claw delivers the paper stack by pushing the stack onto the delivery tray.
Staples the sheets.
Staples sheets without using staples.
Holds down the paper stack in the delivery tray.
18
Rear Alignment Plate
Return Belt
Assist Claw
Assist Guide
Stopper
Function
2. Technical Explanation
Staple-free
Staple Unit