Canon Inner Finisher-H1 Service Manual page 40

Jam code
Staple-free staple jam
1804
1805
1C14 Error avoidance jam
1C16
1C30
1C32
1C35
1C37
1C40
1C77
1F01 Paper feed cancellation jam
1F32 Manual stack insertion jam
1F90 Operation preparation/comple-
tion response timeout jam
Jam type Sensor
-
-
-
-
-
Staple operation timeout error:
The clinch unit rotation sensor (PS13) cannot detect the re-
duction in revolution within 2 seconds of starting the clinch
motor (M9) operation.
Post-staple-processing operation timeout error:
The clinch HP sensor (PS15) does not turn off even when 4
seconds have elapsed after the clinch motor (M9) starts run-
ning.
Assist motor error (E514)
Paddle motor error (E516)
Rear alignment motor error (E530)
Stapler shift motor error (E532)
Return belt motor error (E535)
Front alignment motor error (E537)
Tray shift motor error (E540)
Paddle motor error (E577)
The finisher receives a paper feed cancellation instruction
from the host machine for paper delivered according to a
paper reception notification signal.
A paper stack is inserted in the manual staple slit while the
stapler unit is moving. This is not detected when the stapler
unit is moving to the staple replacement position.
A start response cannot be returned within 60 seconds of
receiving a start request signal.
An operation completion response cannot be returned within
60 seconds of receiving an operation completion request
signal.
34
2. Technical Explanation
Jam description