Canon Inner Finisher-H1 Service Manual page 69

CAUTION:
How to assemble the cable of the Processing Tray
Be sure to route the Cables [1] of the Processing Tray
inside of the Cables [2] to cause abnormal noise by
interfering with the tray guide cover.
10. Rotate the machine [1] as shown below.
[1]
[2]
[1]
[2]
63
4. Parts Replacement and Cleaning
11. Remove the 2 Screws [2] of the Front/Rear Return
Belt Guide.
NOTE:
When attaching part of the Rail is positioned at attaching
part of the Inner Puncher Unit, remove the Rail before
proceeding to the next procedure.
2x
[1]
12. Return the machine to its original position.
13. Remove the Center Return Belt Guide [1].
• 2 Bosses [2]
[1]
[2]
14. Remove the Rear Return Belt Guide [1].
• 1 Boss [2]
[1]
[2]