Canon Inner Finisher-H1 Service Manual page 27

The relationship between operation modes and alignment positions is summarized in the following table.
Operation Paper Width
Mode
Non-Sort 297.0 mm or less Not defined
More than 297.0
mm
Free size
Shift-Sort 210.0 to 297.0
mm
Operation Mode
Staple A3, B4, A4, A4R, B5, 11X17,
LGL, LTR, LTR-R, 8K, 16K, EX-
EC
Staple-free staple A3, B4, A4, B5, 11X17, LTR,
8K, 16K
Related service mode
• Adjustment of alignment position (A4):
SORTER > ADJUST > INF-ALG1
• Adjustment of alignment position (LTR):
SORTER > ADJUST > INF-ALG2
Related error code
• E537-8001: Front alignment motor error
• E537-8002: Front alignment motor error
• E530-8001: Rear alignment motor error
Front Alignment
Plate
Front Alignment Plate
HP Sensor (PS4)
Paper Length
envelope (COM10-R, Mon-
arch-R, DLR), STMTR, A5R,
B5R, EXEC-R, K16R, A5,
STMT, A4, LTR, K16, A3,
11X17, K8
SRA3, 12X18
173.4 to 215.9 A3, A4, A4R, B4, B5, 11X17,
mm LTR-R, LGL, LTR, 8K , 16K,
EXEC
Paper Size
Front 1-point stapling: Front of the paper stack
End face at 148.5 mm in front of the center
Rear 1-point stapling: Rear of the paper stack
End face at 148.5 mm to the rear of the center
2-point stapling: Center alignment
Rear of the paper stack
End face at 148.5 mm to the rear of the center
Rear Alignment Motor (M4)
Front Alignment Motor (M3)
Standard Paper Alignment Position
Center alignment*1
20 mm front of the center
position
Center alignment (howev-
er, 20 mm in front of the
center position if the width
is more than 297 mm)
Front shift: 20 mm in front
of the center position
Rear shift: 10 mm to the
rear of the center position
Shift amount: 30 mm
Alignment Position
21
2. Technical Explanation
Rear Alignment
Plate
Rear Alignment Plate
HP Sensor (PS5)
*1: If the width is less
than 120.0 mm, the
alignment plate does
not reach the end of the
paper. Therefore, align-
ment is made at +8 mm
from the end of the pa-
per for the front and
rear.
Remarks
Center alignment is used for A4
and A3(paper width 297 mm).
Center alignment is used for A4
and A3(paper width 297 mm).
Remarks