Glossary; Community Resources - Texas Instruments TMS320C6748 Manual

Fixed- and floating-point dsp
Hide thumbs Also See for TMS320C6748:
Table of Contents

Advertisement

www.ti.com
SPRUFK5
TMS320C674x DSP Megamodule Reference Guide. Describes the TMS320C674x digital
signal processor (DSP) megamodule. Included is a discussion on the internal direct memory
access (IDMA) controller, the interrupt controller, the power-down controller, memory
protection, bandwidth management, and the memory and cache.
SPRUFK9
TMS320C674x/OMAP-L1x Processor Peripherals Overview Reference Guide. Provides
an overview and briefly describes the peripherals available on the device.
SPRUGJ7
TMS320C6748 DSP System Reference Guide. Describes the System-on-Chip (SoC)
system. The SoC system includes TI's standard TMS320C674x Megamodule and several
blocks of internal memory (L1P, L1D, and L2).
SPRUGQ9
TMS320C674x/OMAP-L1x Processor Security User's Guide. Provides an overview of the
security concepts implemented on TI Basic Secure Boot devices.
Technical Reference Manuals
7.4

Community Resources

The following links connect to TI community resources. Linked contents are provided "AS IS" by the
respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views;
see TI's
Terms of
Use.
TI E2E™ Online Community
collaboration among engineers. At e2e.ti.com, you can ask questions, share knowledge,
explore ideas and help solve problems with fellow engineers.
TI Embedded Processors Wiki
from Texas Instruments and to foster innovation and growth of general knowledge about the
hardware and software surrounding these devices.
7.5
Trademarks
TMS320C6748, BIOS, E2E are trademarks of Texas Instruments.
Windows is a registered trademark of Microsoft.
All other trademarks are the property of their respective owners.
7.6
Electrostatic Discharge Caution
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
7.7
Export Control Notice
Recipient agrees to not knowingly export or re-export, directly or indirectly, any product or technical data
(as defined by the U.S., EU, and other Export Administration Regulations) including software, or any
controlled product restricted by other applicable national regulations, received from disclosing party under
nondisclosure obligations (if any), or any direct product of such technology, to any destination to which
such export or re-export is restricted or prohibited by U.S. or other applicable laws, without obtaining prior
authorization from U.S. Department of Commerce and other competent Government authorities to the
extent required by those laws.
7.8

Glossary

TI Glossary
This glossary lists and explains terms, acronyms, and definitions.
Copyright © 2009–2017, Texas Instruments Incorporated
The TI engineer-to-engineer (E2E) community was created to foster
Established to help developers get started with Embedded Processors
Submit Documentation Feedback
Product Folder Links:
TMS320C6748
TMS320C6748
SPRS590G – JUNE 2009 – REVISED JANUARY 2017
Device and Documentation Support
265

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omap-l138 c6000

Table of Contents