Changing The Color Mode - Sharp MX-M950 Software Manual

CHANGING THE COLOR MODE

This procedure is used to change the color mode used to scan the original when the [START] key (
• This function cannot be used in Internet fax mode and in fax mode.
• The [Color Mode] key will only appear if the color expansion kit has been installed.
Mode
Auto Grayscale
Mono2
Full Color
Grayscale
Mono2
Select the mode and display the color mode settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Color Mode] key.
☞
IMAGE SETTINGS
Image will be sent in [Mono2]
if Fax or I-Fax destination is included.
2
When a broadcast transmission is performed using mixed send modes, the image is sent in Mono2.
Scan/Color Mode
Full Color
3
Grayscale
• System Settings (Administrator): Default Color Mode Settings
The default color mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the color mode.
The machine detects whether the original is color or black and white and automatically selects full
color or black and white (Mono2 or Grayscale) scanning.
The original is scanned in full color. This mode is best for full color originals such as catalogues.
The colors in the original are scanned in black and white as shades of gray (grayscale).
Colors in the original are scanned as black or white. This mode is best for text-only originals.
(page 68)
OK
Auto Grayscale
Mono2 Mono2
Mono2
(1)
Scanning method
Read the displayed message and touch
the [OK] key.
A message does not appear in USB memory mode. Go to the
next step.
Select the color mode.
OK
(1) Touch the key of the desired color mode.
If [Auto] is selected, select whether or not the original will
be scanned in grayscale or mono2 when it is detected that
the original is a black & white original. Note that if the file
format is set to JPEG, scanning will take place in
grayscale.
(2) Touch the [OK] key.
(2)
85
) is pressed.