Giving Priority To A Reserved Job - Sharp MX-M950 Software Manual

GIVING PRIORITY TO A RESERVED JOB

When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
1
Print Job
Scan to
Address
1 Broadcast0001
2
AAA AAA
3
BBB BBB
2
4 CCC CCC
Fax mode:
If the job in progress is a broadcast transmission job or a serial polling job, the priority job will be transmitted between
destinations of the broadcast transmission or serial polling job. However, if the priority job is a broadcast transmission job or
a serial polling job, it will be executed after the current job is completed.
JOB STATUS
(1)
Internet Fax
Fax Job
Set Time Pages Status
10:00 04/01 020/003 Connecting
10:05 04/01 000/001 Waiting 1
1
10:22 04/01 000/004 Waiting
10:30 04/01 000/010 Waiting
(2) (3)
Press the [JOB STATUS] key.
Select the job to which you wish to give
priority.
(1) Touch the mode tab of the job to be given
Job Queue
priority.
Complete
(2) Touch the key of the job to be given priority.
(3) Touch the [Priority] key.
Detail
The selected job moves up to the position immediately
Priority
following the job in progress. The job will be executed
Stop/Delete
when the job in progress is completed.
169