Sharp MX-M950 Software Manual page 178

Settings
Item
Program Number
Program Name
Address Book
Address Book screen
Address Review
Condition Settings
Mode Settings
Set the number to be assigned to the program. The lowest available number is
automatically entered. If you wish to change the number, enter a number from 01 to
48. A number that is already in use cannot be assigned.
Enter a maximum of 18 characters for the program name.
Select the address(es) to be used in the program from the address book. Up to 500
destinations can be stored in one program. (If a Scan to Network Folder destination
is selected, only one destination can be stored.)
This displays a list of the currently stored addresses.
This displays a list of the selected addresses. Addresses can be deleted from this list
if needed.
Select the mode in which the address is used (Internet fax, scan, etc.). When a mode
is selected, the settings for that mode appear.
Frequently used settings can be stored in the same way as when they are selected
for a mode. For more information, see the manuals for each mode.
178
Description