Sharp MX-M950 Software Manual page 38

Scan/Original
Scan Size
Auto
4
2-Sided 2-Sided
Booklet Tablet
The original orientation is initially set to
necessary.
Press the [START] key (
Scanning begins.
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one
page, go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission
will take place.
• If the color expansion kit is installed and the color mode is set to [Auto], the color used in the original is automatically
detected and scanning takes place in full color, grayscale, or mono2. If the color expansion kit is not installed,
scanning takes place in mono2.
5
• If the file type is [Encrypt PDF], a password entry screen will appear when the [START] key (
Touch the [Entry] key to open the keyboard screen, enter a password (maximum of 32 characters), and touch the
[OK] key. The recipient must use the password entered here to open the encrypted PDF file.
To cancel encrypted PDF, touch the [Cancel] key. The format settings screen will appear to let you change the file
type. Select a new file type and press the [START] key (
(1)
100% Send Size
Auto
8½x11
Image Orientation
).
Specify the orientation in which the
(2)
original is placed.
OK
To enable the original to be scanned in the correct orientation
(the orientation of the top edge of the original that is shown at
the top of the display), specify the orientation in which the
original was placed in step 1.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the
the top edge of the original is to the left, touch the
key.
(2) Touch the [OK] key.
You will return to the screen of step 3.
. If the original was placed with the top edge up, this step is not
Please enter encrypt PDF
password.
Cancel
) to begin transmission.
38
Entry
key. If
) is pressed.