Sharp MX-M950 Software Manual page 74

Specifying the send size of the image
Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If
a send size smaller than the scan size is selected, the image will be reduced.
• The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by
numerical values.
• The send size cannot be specified when [TIFF-S] is selected for the format in Internet fax mode. (The send size is fixed at
8-1/2" x 11"R (A4R).)
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
1
(2) Touch the [Original] key.
☞
IMAGE SETTINGS
Scan/Original
Scan Size
Auto
2
2-Sided
Booklet
Scan/Original
Auto
Manual
5½x8½
5½x8½R
8½x13(216x330)
3
8½x11
• Depending on the paper size specified for the "Scan Size", it may not be possible to select some sizes for the "Send
Size". Size keys that cannot be specified for the "Send Size" are grayed out to prevent selection.
• To specify an AB size for the send size, touch the [AB
send size.
(page 68)
100% Send Size
Auto
8½x11
Image Orientation
2-Sided
Tablet
(1)
8½x11
8½x11R
11x17
8½x13 (216x340) 2
5
8½x14
Touch the [Send Size] key.
OK
Specify the send size.
(2)
(1) Touch the desired send size key.
OK
(2) Touch the [OK] key.
AB
Inch
Inch] key to highlight the [AB] side and then specify the
74