Receiving A Fax After Answering Acall On The Extension Phone (Remote Reception); Making And Receiving Phone Calls - Sharp MX-M950 Software Manual

RECEIVING A FAX AFTER ANSWERING A CALL ON
THE EXTENSION PHONE (Remote Reception)
Follow the steps below if you need to start fax reception after answering a call and speaking on the extension phone.
If you are on a pulse-dial (rotary) line, set the extension phone to issue tone signals.
For details on receiving faxes, see
1
2
3
• System Settings: Receive Setting (Fax Settings)
To use remote fax reception, set this setting to "Manual Reception".
☞
FAX DATA RECEIVE/FORWARD
• System Settings (Administrator): Remote Reception Number Setting
This is used to change the number used for remote fax reception. The factory default setting is "5".

MAKING AND RECEIVING PHONE CALLS

You can make and receive calls like normal on your extension phone. A phone call can also be made by dialing on the
machine.
"RECEIVING FAXES" (page 150).
(page 181)
147
When you hear ringing, answer the call
on the extension phone.
Signal the machine to start fax
reception.
Press on the keypad of the extension phone.
Replace the extension phone.
The machine sounds a beep when reception ends.