Using The Resend Function - Sharp MX-M950 Software Manual

USING THE RESEND FUNCTION

The destinations of the most recent 8 transmissions by Scan to E-mail, Internet fax and/or fax are stored. One of these
can be selected to resend to that destination.
Ready to send.
Scan Internet Fax
Address Book
Original
Address Entry
Exposure
1
Send Settings Resolution
Address Review File Format
Color Mode
File
Special Modes
Quick File
Resend
No.01 AAA AAA
No.03 CCC CCC
2
No.05 EEE EEE
No.07 GGG GGG
• When the [Resend] key is touched and a destination selected, the mode of the selected destination is automatically
selected.
• Resending is not possible to the following destinations.
- A one-touch key in which multiple destinations are stored (group key).
- Scan to FTP, Scan to Desktop, and Scan to Network Folder addresses.
- Broadcasting destinations
- Addresses used only for BCC delivery
- Destinations transmitted to using a program
• Fax mode:
If numeric keys were pressed during the previous transmission, the [Resend] key may not dial the correct number.
System Settings (Administrator): Settings to Disable Transmission
When "Disable [Resend] on Image Send Mode" is enabled, the resend function cannot be used.
Resend
Fax Data Entry USB Mem. Scan
Scan: Auto 8½x11 Send: Auto
Auto Text
200X200dpi
PDF PDF
Mono2
Cancel
No.02 BBB BBB
No.04 DDD DDD
No.06 FFF FFF
No.08 HHH HHH
Touch the [Resend] key.
Touch the key of the desired address.
The last 8 addresses used for transmission are displayed.
When a Scan to E-mail address is selected, a selection screen
for the delivery method will appear. Normally the [To] key is
selected in this screen.
33