Direct Transmission Mode - Sharp MX-M950 Software Manual

DIRECT TRANSMISSION MODE

If you wish to send a fax ahead of other previously reserved fax transmissions, use direct transmission mode. The
original is transmitted directly to the receiving fax machine without being scanned into memory. When direct
transmission mode is used, transmission will begin as soon as the transmission in progress is completed (ahead of any
previously reserved transmissions).
When sending a fax from the document glass in direct transmission mode, only one page can be transmitted.
• Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation (
orientation (
manually.
• Image rotation
8-1/2" x 11" and 5-1/2"x8-1/2"R (A4, B5R, and A5R) originals are rotated 90 degrees and transmitted in
1
8-1/2" x 11"R or 5-1/2" x 8-1/2" (A4R, B5, or A5) orientation. 8-1/2" x 11"R and 5-1/2" x 8-1/2" (A4R, B5, and A5)
originals cannot be rotated for transmission.
• Originals cannot be scanned in succession from both the automatic document feeder and the document glass and
sent in a single transmission.
System Settings (Administrator): Rotation Sending Setting
This is used to select whether or not a scanned original image is rotated before transmission.
The factory default setting is: rotate 8-1/2" x 11" to 8-1/2" x 11"R, and 5-1/2" x 8-1/2"R to 5-1/2" x 8-1/2" (A4 to A4R,
B5R to B5, and A5R to A5).
(3)
5 10 15 To
Condition
Settings
AAA AAA
Address Review
CCC CCC
Address Entry
EEE EEE
Global
GGG GGG
Address Search
III III
Sub Address
2
Frequent Use
Sort Address
• Only one destination can be entered. A one-touch key in which multiple destinations are stored (group key) cannot be used.
• There is no need to touch the [To] key.
• If the network scanner expansion kit and Internet fax expansion kit are not installed, the [To] key and [Cc] key will not appear.
• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can
also manually enter a destination or look up a destination in a global address book. For more information, see
ENTERING
), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size
(2)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
ABCD EFGHI JKLMN OPQRST
Auto Reception
Fax Memory:100%
DESTINATIONS" (page 25).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Transmission
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
1
2
(2) Touch the one-touch key of the desired
destination. The
one-touch keys that contain fax numbers.
(3) Touch the [Condition Settings] key.
UVWXYZ
57
). If placed in landscape (horizontal)
icon appears in
"2.