Sharp MX-M950 Software Manual page 83

Scan/File Format
File Type
PDF
Encrypt PDF
Programmed
Specified Pages per File
4
(1)
• When a checkmark does not appear in the [Specified Pages per File] checkbox
scanned pages.
• When [Specified Pages per File] is selected, consecutive numbers are added to the created file names.
• When [JPEG] is selected for the file type, one file is created for each page (a file cannot be created for multiple
pages). For this reason, the [Specified Pages per File] checkbox does not appear.
When [Encrypt PDF] is selected, a password entry screen will appear when the [START] key (
scanning and transmission.
Touch the [Entry] key in the displayed screen to open the keyboard screen. Enter a password (maximum of 32 characters)
and touch the [OK] key. Scanning and transmission will begin.
System Settings (Administrator): Initial File Format Setting
This sets the default file format setting for scanner transmission.
Compression Ratio
TIFF Low
JPEG Medium
High
Color/Gray
(1-99)
1
(2)
To change the number of pages per file,
(3)
enter the number of pages and exit the
OK
format settings.
(1) Touch the [Specified Pages per File]
checkbox so that a checkmark
B/W
(2) Set the number of pages per file with the
(3) Touch the [OK] key.
83
keys.
, one file is created for all
) is pressed to begin
appears.