Handling Notes; Notes On Disposal; Rear Shock Absorber Inspection - Yamaha XVS6501997 Service Manual

REAR SHOCK ABSORBER AND SWINGARM

HANDLING NOTES

This shock absorber contains highly com-
pressed nitrogen gas. Read and understand
the following information before handling
the shock absorber. The manufacturer can-
not be held responsible for property dam-
age of personal injury that may result from
improper handling.
1. Do not tamper or attempt to open the
cylinder assembly.
2. Do not subject shock absorber to an
open flame or other high heat. This
may cause the unit to explode due to
excessive gas pressure.
3. Do not deform or damage the cylinder
in any way. Cylinder damage will re-
sult in poor damping performance.

NOTES ON DISPOSAL

*****************************************************
Shock absorber disposal steps:
D Gas pressure must be released before dis-
posing of the shock absorber. To do so, drill a
2 X 3 mm hole through the cylinder wall as
shown.
Wear eye protection to prevent eye damage
from escaping gas and/or metal chips.
*****************************************************

REAR SHOCK ABSORBER INSPECTION

1. Inspect:
S Rear shock absorber rod
Bends/damage ! Replace the rear
shock absorber assembly.
S Rear shock absorber
Oil leaks/gas leaks ! Replace the rear
shock absorber assembly.
S Spring
Wear/damage ! Replace the rear shock
absorber assembly.
S Bushings
S Collars
Damage/scratches ! Replace.
S Dust seals
Wear/damage ! Replace.
S Bolts
Wear/bends/damage ! Replace.
6-48
CHAS