Yamaha XVS6501997 Service Manual page 197

CARBURETOR
2. Adjust:
S TPS position
*****************************************************
Adjustment steps:
D Loosen the TPS mounting screws 1 .
D Adjust the TPS resistance by turning the sen-
sor body to the right or left. Stop turning the
sensor body when the specified resistance is
indicated on the tester.
Resistance when the throttle is closed =
Resistance "R
Example:
D If "R
" = 5 kΩ:
1
(0.13 X 0.15) = 0.65 X 0.75
5
The specified resistance when the throttle is
closed is 650 X 750 Ω.
D Tighten the TPS mounting screws.
D Detach the pocket tester leads and connect
the TPS connector.
*****************************************************
5-9
CARB
(0.13 X 0.15)
"
1