Special Tools - Yamaha XVS6501997 Service Manual

EB102001

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only
the appropriate special tools; this will help prevent damage caused by the use of inappropriate tools or
improvised techniques. Special tools may differ by shape and part number from country to country. In
such a case, two types are provided.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Slide hammer bolt/weight
Weight
90890-01084
Bolt
These tools are used to remove the
90890-01085
rocker arm shaft.
Final gear backlash band
90890-01231
This tool is needed when measuring
final gear backlash.
Piston pin puller
90890-01304
This tool is used to remove the
piston pin.
Fuel level gauge
90890-01312
This gauge is used to measure the
fuel level in the float chamber.
T-handle/damper rod holder
T-handle
90890-01326
Holder
These tools are needed to loosen and
90890-01388
tighten the damper rod holding bolt.
Flywheel puller/adapter
Puller
90890-01362
Adapter
These tools are needed to remove
90890-04089
the rotor.
Fork seal driver weight/adapter
Weight
90890-01367
These tools are needed when installing
Adapter
the slide metal, oil seal and dust seal into
90890-01381
the fork.
Ring nut wrench
90890-01403
This tool is needed to loosen and tighten
the steering stem ring nut.
Tool name/How to use
1-5
SPECIAL TOOLS
GEN
INFO
Illustration