Yamaha XVS6501997 Service Manual page 194

CARBURETOR
1. Install:
S Needle jet 1
NOTE:
D Align the groove on the needle jet with the
projection on the carburetor body.
D Install the needle jet from the piston valve
side.
2. Install:
S Pilot screw 1
Pilot screw (turns out):
2
3. Install:
S Jet needle
NOTE:
Align the projection a on the plastic stopper
with the hole b in the piston valve.
4. Install:
S Diaphragm 1
NOTE:
Match the tab on the diaphragm to the recess in
the carburetor body.
5. Install:
S Diaphragm 1
S Compression spring 2
S Cover 3
NOTE:
Match the tab on the diaphragm to the recess in
the carburetor body.
5-6
CARB