Swingarm Installation; Rear Shock Absorber Installation - Yamaha XVS6501997 Service Manual

REAR SHOCK ABSORBER AND SWINGARM
4. Inspect:
S Collars 1
S Oil seals 2
S Bearings 3
S Rubber boot 4
Wear/damage ! Replace.

SWINGARM INSTALLATION

1. Install:
S Swingarm
S Pivot shaft (left) 1
S Pivot shaft (right) 2
S Pivot shaft nut 3
*****************************************************
Tightening steps:
D Tighten the pivot shaft (left) 1 to specifica-
tion.
Pivot shaft (left):
100 Nm (10 mSkg)
LOCTITE
D Tighten the pivot shaft (right) 2 until it con-
tacts the collar.
Pivot shaft (right):
7 Nm (0.7 mSkg)
D Tighten the pivot shaft nut 3 to specification.
Pivot shaft nut:
100 Nm (10 mSkg)
*****************************************************

REAR SHOCK ABSORBER INSTALLATION

1. Install:
S Rear shock absorber 1
NOTE:
Install the rear shock absorber with the warning
label 2 facing up.
6-50
CHAS
62 Nm (6.2 mSkg)