Ac Magneto Removal; Starter Clutch Inspection - Yamaha XVS6501997 Service Manual

AC MAGNETO AND STARTER CLUTCH

AC MAGNETO REMOVAL

1. Remove:
S Rotor
S Woodruff key
*****************************************************
Removal steps:
D Remove the starter clutch bolts 1 .
D Remove the rotor bolt 2 and washer 3 .
NOTE:
Loosen the starter clutch bolts 1 and rotor bolt
2 while holding the rotor with a sheave holder
4 .
Sheave holder:
90890-01701
Flywheel puller:
90890-01362
Adapter:
90890-04089
D Remove the rotor and the woodruff key.
NOTE:
D When installing the flywheel puller remove
three of the starter clutch bolts.
D Remove the rotor by pushing back the rotor,
the flywheel puller 5 and the adapter 6 .
D Install the flywheel puller bolts and tighten the
center bolt, making sure that the tool body
stays parallel to the rotor. If necessary, one
holding bolt may be backed out slightly for re-
alignment of the tool.
*****************************************************

STARTER CLUTCH INSPECTION

1. Inspect:
S Gear teeth (idler) 1
S Gear teeth (starter wheel) 2
Burrs/chips/roughness/wear
place.
S Shaft 3
Bends/damage ! Replace.
4-50
ENG
!
Re-