Yamaha XVS6501997 Service Manual page 54

G To the ignition coil.
H Pass the starter cable between the ignition
coil and spark plug lead.
I To the throttle position sensor (TPS).
J To the carburetor.
K To the fuel tank.
L Pass the neutral switch lead, pickup coil lead
and A.C. magneto lead under the ignition coil
lead, thermo switch lead and throttle position
sensor (TPS) lead.
M From the engine.
CABLE ROUTING
N 20 mm
O Pass the thermo switch lead inside of the
silencer breather hose.
P Place the end of the plastic locking tie as
shown.
Q Inside the motorcycle.
R Fasten the wire harness with a plastic locking
tie.
S Pass the wire harness between the air filter
case groove and frame.
2-34
SPEC