Install Shelf Rails And Back Mounting Brackets - Oracle sun X4-8 Installation Manual

Install Shelf Rails and Back Mounting Brackets

3. Remove the rack mounting kit (1) and set it and its contents aside.
4. Remove the tray (2) and set it aside.
Lift the box (3) up and away from the server.
5.
6. Remove the foam inserts (4).
Fold the corrugated flap down to release the front foam insert.
a.
b. Remove the front and rear inserts.
Remove the anti-static wrapper from the server.
7.
8. To remove the server from the pallet, insert the blades of the lift in the gap
between the server and the pallet.
For rack mounting instructions, see
Callout
1
2
3
4
5
6
Install Shelf Rails and Back Mounting Brackets
Identify the location in the rack where you plan to place the Sun Server X4-8. It requires five
Before You Begin
rack units.
Ensure that your rack meets the requirements in
Caution -
bottom up so that the rack will not become top-heavy and tip over. Deploy your rack's anti-tip
device to prevent the rack from tipping during equipment installation.
Determine your server location in the rack.
1.
The Sun Server X4-8 requires five rack units.
40 Sun Server X4-8 Installation Guide • December 2015
Description
Rack mounting kit
Tray
Box
Foam inserts
Server
Pallet
Equipment damage or personal injury. Always load equipment into a rack from the
"Rack Installation Instructions" on page
"Rack Compatibility" on page
35.
36.