Oracle sun X4-8 Installation Manual page 102

Configure RAID in UEFI Boot Mode
For example, do one of the following:
From the local server, press the Power button (approximately 1 second) on the front panel of
■
the server to power off the host, then press the Power button again to power it back on.
From the Oracle ILOM web interface, select Host Management > Power Control, then
■
select Reset from the Select Action list box.
From the Oracle ILOM CLI, type:
■
The BIOS screen appears.
2. When prompted in the BIOS screen, press F2 access the BIOS Setup Utility.
After a few moments, the BIOS Setup Utility appears.
Use the right arrow key to navigate to UEFI Driver Control menu.
3.
The UEFI Driver Control menu appears.
4. Use the up and down arrow keys to navigate to the LSI SAS2 MPT Controller
menu option, and press Enter.
102 Sun Server X4-8 Installation Guide • December 2015
reset /System