Reinstalling The Oracle Solaris Operating System - Oracle sun X4-8 Installation Manual

Reinstalling the Oracle Solaris Operating System

Note -
the remainder of the OS configuration process, the system will direct output to the serial port
and not to the video port.
Follow the Oracle Solaris 11 installer on-screen prompts to configure the
5.
operating system.
Use the information gathered in Worksheet for Oracle Solaris operating system Configuration
in "Preparing for the Oracle Solaris Configuration" on page 119
and network information as you are prompted.
The screens might vary, depending on the method that you chose for assigning network
information to the server (DHCP or static IP address).
After you have entered the system configuration information, the server completes the boot
process and displays the Oracle Solaris login prompt.
"Reinstalling the Oracle Solaris Operating System" on page
See Also ■
For information on using the Oracle Solaris OS, including registration, see
■
11 Operating System Documentation" on page
Reinstalling the Oracle Solaris Operating System
If you want to reinstall the Oracle Solaris 11 OS or install a different version of the Oracle
Solaris OS, refer to the relevant Oracle Solaris installation guide.
You can download software for the Oracle Solaris OS from the following sites:
To download the Oracle Solaris 11 operating system, go to:
■
http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.
html
To download Oracle Solaris patches, go to:
■
https://support.oracle.com
Related Information
"Configure the Preinstalled Oracle Solaris 11 Operating System" on page 122
■
"Oracle Solaris 11 Operating System Documentation" on page 125
■
124 Sun Server X4-8 Installation Guide • December 2015
If you do not make a selection, Serial Port (ttya) is used by default. This means that for
to help you enter the system
124.
125.
"Oracle Solaris