Oracle Vm Configuration Worksheet; Configure The Preinstalled Oracle Vm Server - Oracle sun X4-8 Installation Manual

Oracle VM Configuration Worksheet

Oracle VM Configuration Worksheet
Before configuring the Oracle VM server, use the worksheet in this section to gather the
information you need.
Information for Configuration
Oracle VM server root account
password
Oracle VM agent password
Network interface
Static IP address
Netmask
Gateway
DNS server
Host name

Configure the Preinstalled Oracle VM Server

These instructions describe only how to configure preinstalled Oracle VM server on your
server. Oracle VM also has other components, such as Oracle VM Manager, that must be
installed or already operational to support the virtual machine environment.
1. Log in to Oracle ILOM, either locally from a serial connection or remotely using
an Ethernet connection.
See "Connecting to Oracle ILOM" on page
128 Sun Server X4-8 Installation Guide • December 2015
Description or Example
Choose a root password; there are
no restrictions on the characters or
length.
Choose an Oracle VM agent
password; password must be at least
six characters.
Supply the interface (eth#) to be used
to manage the server.
Supply the IP address for the server.
A static IP address is required.
Example: 192.0.2.0
If the server is part of a subnet,
supply the netmask of the subnet.
Example: 255.255.0.0
If the server is accessed via a
gateway, supply the IP address of the
gateway.
Supply the IP address for the domain
name server (DNS). One (and only
one) DNS is required.
Supply the fully qualified domain
name for the server.
Example: xxx.oracle.com
53.
Your Answers