Configuring Raid Using The Bios Raid Configuration Utilities; Configuring Raid Using The Bios With The Sun Storage 6 Gb Sas Pcie Internal Hba; Configuring Raid Using The Bios Raid Configuration - Oracle sun X4-8 Installation Manual

To return to the Oracle System Assistant System Overview screen, click System
■
Information in the left menu panel.
To quit Oracle System Assistant, click Exit.
■
"Set Up an Operating System and Drivers" on page 117
See Also ■

Configuring RAID Using the BIOS RAID Configuration

Utilities
You can configure RAID using Oracle System Assistant or, if Oracle System Assistant is not
available, you can use the BIOS RAID configuration utilities that reside in the HBA firmware.
The procedures for configuring RAID differ depending on the type of HBA installed the server.
For instructions on how to use these utilities, see the following sections:
"Configuring RAID Using the BIOS With the Sun Storage 6 Gb SAS PCIe Internal
■
HBA" on page 101
"Configuring RAID Using the BIOS With the Sun Storage 6 Gb SAS PCIe RAID Internal
■
HBA" on page 104
Configuring RAID Using the BIOS With the Sun
Storage 6 Gb SAS PCIe Internal HBA
The BIOS RAID configuration utilities support configuring RAID with the server set to UEFI
boot mode and legacy boot mode. A separate utility is provided for each boot mode.
Note -
mode. For a list of operating systems and virtual machine software that support UEFI boot
mode, see
"Configure RAID in UEFI Boot Mode" on page 101
■
"Configure RAID in Legacy Boot Mode" on page 103
■
Configure RAID in UEFI Boot Mode
1. Power on or reset the server (host).
Some operating systems and virtual machine software only support the legacy boot
"UEFI BIOS" on page

Configuring RAID Using the BIOS RAID Configuration Utilities

27.
Configure Storage Drives for OS Installation 101