See Also ■ "Set Up An Operating System And Drivers - Oracle sun X4-8 Installation Manual

The LSI SAS MPT Controller menu appears.
The LSI SAS MPT Controller menu changes depending the configuration of the server.
Note -
5. Use the BIOS configuration utility to configure RAID on the server.
For instructions on how to use the BIOS configuration utilities to configure RAID in UEFI boot
mode, refer to instructions for creating a bootable drive on x86/64 systems in the Sun Storage
6 Gb SAS PCIe HBA, Internal Installation Guide For HBA Models SGX-SAS6-INT-Z and SG-
SAS6-INT-Z at: http://docs.oracle.com/cd/E19337-01/index.html.
"Set Up an Operating System and Drivers" on page 117
See Also ■
Configure RAID in Legacy Boot Mode
1. Power on or reset the server (host).
For example, do one of the following:
From the local server, press the Power button (approximately 1 second) on the front panel of
■
the server to power off the host, then press the Power button again to power it back on.
From the Oracle ILOM web interface, select Host Management > Power Control, then
■
select Reset from the Select Action list box.
Configure RAID in Legacy Boot Mode
Configure Storage Drives for OS Installation 103