Oracle sun X4-8 Installation Manual page 135

To restart the server, use one of the following methods:
■
From the Oracle ILOM web interface, click Host Management > Power
■
Control, and then select Reset from the menu.
From the ILOM CLI, type:
■
->
reset /System
When prompted, type
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
3. From Oracle ILOM, start the host console using one of the following methods:
From the Oracle ILOM web interface, click Remote Control > Launch Remote
■
Console.
From the Oracle ILOM CLI, type:
■
->
start /HOST/console
When prompted, type
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
As the host boots, the GRUB menu appears (see example below). Press a key other than
Enter to pause, or in 5 seconds the highlighted selection is used.
GNU GRUB version 0.97 (612K lower / 2082932K upper memory)
+-------------------------------------------------------------------------+
Oracle Linux Server-uek (2.6.39-200.24.1.el6uek.x86_64)
Oracle Linux Server (2.6.32-279.el6.x86_64)
+-------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, 'a' to modify the kernel arguments
before booting, or 'c' for a command-line.
to confirm:
y
to confirm:
y
Configuring the Preinstalled Oracle Linux OS
Configure the Preinstalled Oracle Linux OS
135