Esd Precautions; Optional Component Installation - Oracle sun X4-8 Installation Manual

ESD Precautions

Take care to prevent recirculation of exhaust air within a rack or cabinet.
■
Manage cables to minimize interference with the server exhaust vent.
■
ESD Precautions
Electronic equipment is susceptible to damage from static electricity. Use the following
precautions when you install or service the server.
Use a grounded antistatic wrist strap, foot strap, or equivalent safety equipment.
■
Place components on an antistatic surface, such as an static discharge mat, an antistatic bag,
■
or a disposable antistatic mat.
Caution -
require repair by authorized service technicians.

Optional Component Installation

Standard system components are installed at the factory. Optional components that you
purchased independent of the standard configuration are shipped separately, and in most cases
they should be installed before you install the server in a rack.
The following optional components can be ordered and purchased separately:
PCIe cards
■
DDR3 DIMM memory kits
■
Storage drives
■
Software media
■
To install optional components, refer to the service labels on the top cover of the CPU Module
(CMOD) or the System Module (SMOD) and to the component service procedures in the
Server X4-8 Service
Supported components and their part numbers are subject to change over time and without
notice. For the most up-to-date list, go to:
https://support.oracle.com/handbook_private/
34 Sun Server X4-8 Installation Guide • December 2015
Equipment damage. Electrostatic damage can permanently disable the system or
Manual.
Sun