Auto Smartport Default Configuration - Cisco Catalyst 4500 Series Software Configuration Manual

Configuring Auto Smartport Macros
Command
Step 4
Switch# show running-config
Step 5
Switch# copy running-config
startup-config
Use the show shell functions and the show shell triggers privileged EXEC command to display the event
triggers, the built-in macros, and the built-in macro default values.
This example shows how enable Auto Smartport on the switch and how to disable the feature on a
specific interface:
Switch(config)# macro auto global processing
Switch(config)# interface interface_id
Switch(config-if)# no macro auto processing

Auto Smartport Default Configuration

By default, Cisco IOS shell is enabled and Auto Smartport is disabled globally.
Table 22-1
default.
Table 22-1 Auto Smartport Built-in Event Trigger Macros
Event Trigger Name
CISCO_PHONE_EVENT
CISCO_SWITCH_EVENT
CISCO_ROUTER_EVENT
CISCO_WIRELESS_AP_EVENT
CISCO_WIRELESS_LIGHTWEIGHT_AP_EVENT
CISCO_DMP_EVENT
CISCO_IPVSC_EVENT
Table 22-2
Table 22-2 Auto Smartport Built-in Macros
Macro Name
CISCO_PHONE_AUTO_
SMARTPORT
CISCO_SWITCH_AUTO_
SMARTPORT
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
22-4
Purpose
Verifies that Auto Smartport is enabled.
(Optional) Saves your entries in the configuration file.
shows the Auto Smartport built-in event triggers that are embedded in the switch software by
Description
System detects that a phone device is connected to an interface.
System detects that a switch is connected to an interface.
System detects that a router is connected to an interface.
System detects that a wireless application is connected to an
interface.
System detects that a wireless lightweight application is connected
to an interface.
System detects that a digital media player is connected to an
interface.
System detects that an IP video surveillance camera is connected
to an interface.
shows the Auto Smartport built-in macros that are embedded in the switch software.
Description
Use this macro for Cisco IP phone device. It enables QoS, port security,
Address Resolution Protocol (ARP) inspection (dynamic ARP inspection),
IP source guard, DHCP snooping, storm control and spanning tree
protection on the port.
Use this macro to apply the switch macro for Cisco switches. It enables
trunking on the port.
Chapter 22 Configuring Cisco IOS Auto Smartport Macros