Configuring Vss Auto-Qos - Cisco Catalyst 4500 Series Software Configuration Manual

Chapter 44 Configuring Quality of Service
Command
Step 3
Switch(config)# exit
Step 4
Switch# reload
or
Switch# redundancy reload shelf
Switch# redundancy force-switchover
This is a global configuration command. You can override it with the per port, per class, queue-limit
command.
For a standalone supervisor engine, you must reboot the engine after applying this command.
For redundant supervisors in SSO mode, you must enter the redundancy reload shelf command enforce
reboot to both the supervisors. For redundancy supervisors in RPR mode, you must execute two
consecutive switchovers to enforce the system queue limit on both the supervisors.
This example shows how to set the queue limit globally to 1024 on a standalone supervisor engine:
Switch> enable
Switch# configure terminal
Switch(config)# hw-module system max-queue-limit 1024
Switch(config)# exit
Switch# reload
Switch# redundancy reload shelf (for redundancy supervisors in SSO mode)
or
Switch# redundancy force-switchover (followed by another redundancy force-switchover, for
redundancy supervisors in RPR mode)

Configuring VSS Auto-QoS

•
•
•
•
Auto-QoS Overview
Auto-QoS cannot be applied to VLANs or EtherChannel interfaces.
Note
If you have an auto-QoS policy on a port connected to a device that supports CDP, the port is
Note
automatically trusted. However, if the device does not support CDP (like legacy Digital Media Player),
QoS trust must be applied manually.
(for standalone supervisors)
Auto-QoS Overview, page 44-81
Auto-QoS Policy and Class Maps, page 44-82
Auto-Qos Compact, page 44-87
Effects of Auto-QoS and Auto-Qos Compact on Running Configuration, page 44-88
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Purpose
Returns to privileged EXEC mode.
Reloads standalone supervisor engine.
Reloads redundancy supervisor engine in SSO mode.
Reloads redundancy supervisor engine in RPR mode.
This command must be followed by another redundancy
force-switchover.
Configuring VSS Auto-QoS
44-81