Network Assistant Cli Commands - Cisco Catalyst 4500 Series Software Configuration Manual

Chapter 16 Configuring the Catalyst 4500 Series Switch with Cisco Network Assistant
Table 16-1
Parameters
Authentication
IP address
IP HTTP port number
IP HTTPS port number
IP HTTP server
Cluster run
1. You need to set an IP address in each switch for community device discovery and for the cluster
2. Port number on the Network Assistant and the Catalyst 4500 series switch must match.
3. You can only change this value for a cluster of devices. Port number on the Network Assistant and on the
4. Required for Network Assistant to access the device.
5. Enabled only if you want to manage a cluster of devices.

Network Assistant CLI Commands

Table 16-2
Table 16-2
Command
[no] cluster enable
[no] cluster run
[no] ip http server
[no] ip http port port_number
[no] ip domain-name domain_name
[no] ip http secure-server
[no] ip http secure-port
port_number
[no] ip http max-connections
connection_number
[no] ip http timeout-policy
idle idle_time life life_time
requests requests
Network Assistant-Related Configuration on a Catalyst 4500 Series Switch
commander.
Catalyst 4500 series switch must match. Value can be changed to any non-default number above 1024.
describes the Network Assistant-related CLI commands.
CLI Commands
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Default Value Recommended Value
Disabled Optional
Depends on User selectable
community or
1
discovery option
80 Optional
443 Optional
Disabled Enabled
Disabled Enabled
Functions
Names the cluster.
Enables clustering.
This command is used strictly for
Note
clustering.
Configures the HTTP on a switch.
Configures the HTTP port.
Configures the domain on the switch.
Configures and enable HTTPS on a switch.
Configures the HTTPS port.
Configures the maximum concurrent
connections to the HTTP server.
Configures the HTTPS port.
A idle value of 180 seconds is recommended.
A life value of 180 seconds is recommended.
The recommended maximum number of
requests allowed is 25.
Network Assistant CLI Commands
2
3
4
5
16-3