License Upgrade On A Vss - Cisco Catalyst 4500 Series Software Configuration Manual

Chapter 5 Configuring Virtual Switching Systems
3
4
5
...
...
7200
7201
7203
7301
Switch#
This example shows how to display negotiated information regarding non-IOSd clients:
Switch# show package compatibility
......
......

License Upgrade on a VSS

When a current license is about to expire, or a new license is to be installed, perform the following task
to update the license on a VSS:
Ensure that the new license is installed on both VSS active (Switch 1) and VSS standby (Switch 2). If
Step 1
your device supports using Right-to-use (RTU) licensing, use the following command to activate the new
license on both switches:
Switch# license right-to-use activate {ipbase |entservices | lanbase} acceptEULA
Run the
Step 2
On Switch 2, the VSS standby, shutdown all the non-VSL ports.
Step 3
Shutting down the VSL ports on the VSS active detaches the standby, which might transition to the VSS
Caution
active. If not, reload the VSS standby and allow it to boot as the VSS active. A VSS standby booting as
the active does not pose a network problem because all non-VSL ports are shutdown.
Step 4 On Switch 1, shut down the VSL ports. The VSS standby (Switch 2) becomes the VSS active switch.
Step 5 Reload Switch 2.
Step 6 While Switch 2 boots up with the updated license, run the no shut command on the VSL ports on Switch
1 and reload Switch1 immediately. Switch 2 boots as the VSS standby.
Step 7 When Switch 2 achieves SSO-HOT, run the no shut command on all ports.
Step 8 Failover the chassis to bring the VSS pair license to the correct level.
License installation and subsequent VSS formation are now complete.
ISSU RF
ISSU CF client
ISSU Network RF client
ISSU Archive Client
ISSU Rollback Client
ISSU Shell Client
ISSU ANCP Client
PackageName PeerPackageName
----------- --------------- --------------------------------
rp_base
rp_base
rp_base
rp_base
rp_base
rp_base
Switch# write memory
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Base
Base
Base
Non-Base
Non-Base
Non-Base
Non-Base
rp_base
rp_base
rp_base
rp_base
rp_base
rp_base
command to save the configuration.
License Upgrade on a VSS
ModuleName Compatibility
-------------
aaa COMPATIBLE
aaacommon COMPATIBLE
access_policy COMPATIBLE
app_sess COMPATIBLE
app_sess_ios COMPATIBLE
auth_mgr COMPATIBLE
5-85