Extended System Id - Cisco Catalyst 4500 Series Software Configuration Manual

Cisco ios xe release 3.9.xe and cisco ios release 15.2(5)ex
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 23
Configuring STP and MST

Extended System ID

Extended system IDs are VLAN IDs between 1025 and 4096. Cisco IOS Releases 12.1(12c)EW and later
releases support a 12-bit extended system ID field as part of the bridge ID (see
support only 64 MAC addresses always use the 12-bit extended system ID. On chassis that support 1024
MAC addresses, you can enable use of the extended system ID. STP uses the VLAN ID as the extended
system ID. See the
Table 23-1
Bridge Priority Value with the Extended System ID Disabled
Bridge Priority Value
Bit 16
Bit 15
Bit 14
32768
16384
8192
Table 23-2
Bridge Priority Value and Extended System ID with the Extended System ID Enabled
Bridge Priority Value
Bit 16
Bit 15
Bit 14
32768
16384
8192
STP MAC Address Allocation
A Catalyst 4500 series switch chassis has either 64 or 1024 MAC addresses available to support software
features like STP. Enter the show module command to view the MAC address range on your chassis.
Cisco IOS Release 12.1(12c)EW and later releases support chassis with 64 or 1024 MAC addresses. For
chassis with 64 MAC addresses, STP uses the extended system ID plus a MAC address to make the
bridge ID unique for each VLAN.
Earlier releases support chassis with 1024 MAC addresses. With earlier releases, STP uses one MAC
address per-VLAN to make the bridge ID unique for each VLAN.
Bridge Protocol Data Units
The following elements determine the stable active spanning tree topology of a switched network:
Bridge protocol data units (BPDUs) contain information about the transmitting bridge and its ports,
including the bridge and MAC addresses, bridge priority, port priority, and path cost. The system
computes the spanning tree topology by transmitting BPDUs among connecting switches, and in one
direction from the root switch. Each configuration BPDU contains at least the following:
"Enabling the Extended System ID" section on page
Bit 13
Bit 12
Bit 11
4096
2048
1024
Extended System ID (Set Equal to the VLAN ID)
Bit 13
Bit 12
Bit 11
4096
VLAN ID
The unique bridge ID (bridge priority and MAC address) associated with each VLAN on each switch
The spanning tree path cost (or bridge priority value) to the root bridge
The port identifier (port priority and MAC address) associated with each Layer 2 interface
The unique bridge ID of the switch that the transmitting switch believes to be the root switch
The spanning tree path cost to the root
The bridge ID of the transmitting bridge
The age of the message
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Bit 10
Bit 9
Bit 8
Bit 7
512
256
128
64
Bit 10
Bit 9
Bit 8
Bit 7
Table
23-2). Chassis that
23-9.
Bit 6
Bit 5
Bit 4
Bit 3
32
16
8
4
Bit 6
Bit 5
Bit 4
Bit 3
About STP
Bit 2
Bit 1
2
1
Bit 2
Bit 1
23-3

Advertisement

Table of Contents
loading

Table of Contents