Cisco Catalyst 4500 Series Software Configuration Manual page 567

Chapter 14 Environmental Monitoring and Power Management
Table 14-7
Power Supply
Both sides at 110 V AC
Both sides at 110 V AC + 110 V AC
One side at 110 V AC + 110 V AC, the
other at 110 V AC
Both sides at 220 V AC
Both sides at 220 V AC + 220 V AC
Both sides at 220 V AC + 220 V AC, the
other at 220 V AC
1. Power supply outputs' drawing should not exceed the total power.
Table 14-8
Table 14-8
Power Supply
110 V AC
110 V AC + 110 V AC
220 V AC
220 V AC + 220 V AC
1. Power supply outputs' drawing should not exceed the total power.
In combined mode, all the inputs to the chassis must be at the same voltage.
Table 14-9
Table 14-9
Power Supply
Both sides at 110 V AC
Both sides at 110 V AC + 110 V AC
One side at 110 V AC + 110 V AC, the
other at 110 V AC
Both sides at 220 V AC
Both sides at 220 V AC + 220 V AC
Both sides at 220 V AC + 220 V AC,
the other at 220 V AC
1. Power supply outputs' drawing should not exceed the total power.
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
Output Power in Conbined Mode for the 4200 W AC Power Supply
illustrates how the 6000 W AC power supply is evaluated in redundant mode.
Output Power in Redundant Mode for the 6000 W AC Power Supply
illustrates how the 6000 W AC power supply is evaluated in combined mode.
Combined Mode Output for the 6000 W AC Power Supply
12 V (data) (W) -50 V (PoE) (W)
1188 1531
2448 3071
1818 2301
2448 3071
2448 6142
2447 4607
12 V (data) -50V (PoE)
(W) (W)
850 922
1700 1850
2200 2400
2200 4800
12 V (data) (W) -50 V (PoE) (W) Total Power (W)
1530 1531
3060 3071
2295 2301
3960 3984
3960 7968
2970 5976
Power Management
Total Power (W)
1700
3570
2660
3570
7070
5320
Total
Power
1
(W)
1050
2100
3000
6000
1
1710
3590
2680
5140
10170
7610
1
14-17