Tess Settings - Psion Teklogix 7530 User Manual

Chapter 6: Tekterm Application

TESS Settings

6.18.2 TESS Settings

Each session you create has its own "Settings" parameters. Additional TESS
information is documented in "TESS Emulation" on page 154.
Auto Term#
Note: "Auto Term#" is available when
Conn" parameter (page 213) or when
Menu (see "802.IQ v1" on page 179).
When this parameter is set to "Y", a unique unit number is assigned for the current
TESS session. If "Auto Term#" is set to "Y", any value assigned to the "Terminal #"
parameter is ignored.
Group
When "Auto Term#" is set to "Y", the 'Group' parameter is used to identify the
group or pool of numbers from which an auto-address is chosen.
212
Psion Teklogix 7530 Hand-Held Computer User Manual
TESS
04
Auto Term # N»
Terminal # 1
Host Conn »
Screen »
Characters »
Tests »
Features »
Scanner »
Fields »
Anchor View N»
Emulation »
Auto Term#
Group
Range
see text
see text
see text
see text
see text
see text
see text
see text
see text
see text
is assigned to the "Host
802.IQv2
is enabled in the Radio
802.IQv1
Range
1 1-5