Psion Teklogix 7530 User Manual page 50

Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio Installed In The 7530
4.
The options under this tab display existing networks to which you can
connect, and it allows you to add a new network or modify the settings
for an existing network.
Configure
Note:
the network you want to modify, and choose the
the
Connect
the network to which you want your 7530 to connect, and choose the
button.
This tab lists available networks – any access points that are broadcasting
an SSID, and it lists preferred networks – networks that you have config-
ured. Since access points are generally secure, they will most likely not
be listed here. By default, 7535 attempts to connect to preferred networks.
This behaviour can be changed by enabling (√)
ferred networks'
•
20
Psion Teklogix 7530 Hand-Held Computer User Manual
Wireless Information Tab
button – To change the settings in an existing network, highlight
Wireless Properties
dialogue box.
button – To force connection to a specific, existing network, highlight
Figure 2.8 Wireless Information Tab
Advanced
in the
To add a new configuration, press the <TAB> key to highlight the
Add New
button, and press <ENTER>. A blank
box is displayed.
'Automatically connect to non-pre-
dialogue box (page 26).
Configure
button to display
Connect
Wireless Properties
dialogue