Psion Teklogix 7530 User Manual page 51

5. Wireless Properties
Network name (SSID):
• Type the appropriate SSID (Service Set Identifier) in the '
(SSID):
' text entry field at the top of this dialogue box.
Network name
The
assigned here is listed as a preferred network.
Important: Keep in mind that the 7530 will only communicate with access
points that are configured with the same SSID.
Ad Hoc And Infrastructure
If you are using an "Infrastructure" network – one in which 7530s must
pass data through an access point – leave the checkbox next to
hoc network'
blank.
If you are using an "Ad Hoc" network – a network in which 7530s pass data
directly to other 7530s without an access point – press the <TAB> key to
'This is an ad hoc network',
highlight
Ad Hoc.
Encryption
WEP (Wired-Equivalent Privacy) encryption prevents others from acciden-
tally accessing your network. If you are not using encryption, you can
choose 'Disabled' from the dropdown encryption menu. Otherwise, leave
this field as is.
Configuring An IEEE 802.11 Radio Installed In The 7530
Figure 2.9 Wireless Properties Dialogue Box
field can contain a maximum of 32 characters. The name
and press the <SPACE> key to enable (√)
Psion Teklogix 7530 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Network name
'This is an ad
21